V162B02 DC/DC Solenoid Valve Sirai/Emerson/ASCO

V162B02 DC / DC Solenoid Valve Sirai / Emerson / ASCO

V162B02 DC / DC Solenoid Valve Sirai / Emerson / ASCO.

Features:

• Top quality.
• Finishes and tolerances according to DIN standards.
• 2x M5.
• 24V +/- 10%, DC/CC, 4W.
• Normally closed.
• Flow diameter: 2.0mm.
• Nitrile seals.
• Cº: from 0ºC to 90ºC fluid.
• For air or water.
• Warranty: 3 months.

GENERAL CHARACTERISTICS

Direct control micro solenoid valve.

Small dimensions, high response speed and high number of cycles. Designed for assembly in a battery to create groups of valves

with a single inlet and several independent outlets. Sealing gaskets for assemblies provided with the valve.

Inlet head and seal supplied separately.

A passage hole in the valve body allows the connection of the

inlet of the head to another device (e.g. pressure reducer). Suitable for liquid and gas fluids (check the compatibility of the fluid with the materials in contact).

MATERIALS IN CONTACT WITH THE FLUID

Body Brass

Sealing gaskets FPM – NBR (Gassons)

Internal components Stainless steel

Seat Brass

Cylinder head tube Brass

COIL

Continuous duty ED 100%

Glass fibre reinforced PA (Polyamide) moulding material

Insulation class F (155°C)

Ambient temperature -10°C +60°C

Electrical connection DIN 46340

Protection index IP 65 (EN 60529) with micro-connectors

DC voltages 12 – 24V (+10% -5%)

(Other voltages on request and depending on quantities)

TECHNICAL CHARACTERISTICS

Electrical connection DIN 46340

Maximum allowable pressure (PS) 16 bar Protection index IP 65 (EN 60529) with micro-connectors

Opening time from 5ms to 10ms DC voltages 12 – 24V (+10% -5%)

Closing time from 5ms to 10ms (Other voltages on request and depending on quantities)

Fluid temperature -0°C +90°C

Maximum viscosity 3°E (22 cStokes or mm2/s)