V121V02 DC /CC Solenoid Valve Sirai / Emerson / ASCO inlet

V121V02 DC /CC Solenoid valve Sirai / Emerson / ASCO inlet

V121V02 DC /CC Solenoid valve Sirai / Emerson / ASCO input.

Features:

• First quality.
• Finishes and tolerances according to DIN standards.
• 2x 1/4″.
• 24V +/- 10% DC/DC, 9W.
• Normally closed.
• Pass diameter: 4.5mm.
• Viton gaskets.
• Cº: from 0ºC to 130ºC.
• For air, water or steam.
• Guarantee: 3 months.

GENERAL CHARACTERISTICS

• Direct control solenoid valve.
• Body Brass
• Suitable for liquid and gas fluids (check the compatibility of the fluid with the materials in contact).

MATERIALS IN CONTACT WITH THE FLUID

• Sealing gaskets NBR or FPM or EPDM
• Internal components Stainless steel
• Seat Brass
• Guide tube Stainless steel
• Out-of-phase ring Copper

TECHNICAL CHARACTERISTICS

• Maximum allowable pressure (PS) 40 bar
• Open time  20ms
• Closing time  20ms
• Fluid temperature -10°C +90°C (NBR)
• 0°C +130°C (FPM)
• -10°C +140°C (EPDM)
• Maximum viscosity 5°E (37 cStokes or mm2/s)

COIL

• Continuous duty ED 100%
• Glass fibre reinforced PPS (polyphenylene sulphide) moulding material
• Insulation class F (155°C) on request cl.H (180°C)
• Ambient temperature -10°C +50°C
• Electrical connection DIN 46340 – 3-pole connectors (EN175301-803)
• Protection index IP 67 (EN 60529) with connectors
• DC voltages 12-24V (+10% -5%)
• AC ZA10A: 24V/50Hz – 110V/50Hz (120V/60Hz) –
• 230V/50Hz (+10% -15%)
• (Other voltages and frequencies on request and depending on quantities)

APPROVAL

• UL approval (Class F) – for UL cl. H: ZA34
• IMQ CSV approval, for more details see the ZA10 technical sheet
• According to D.m. 174/2004 and EC Reg. 1935/2004

Sirai a company of the ASCO Numatics group.